Bradford Equipment Inc.
UFDY.com

New & Used Foundry Equipment & Machinery On-line!

SHOT BLAST /SANDBLAST/CLEANING EQUIPMENT Click to enlarge
New & Used Equipment   DESCRIPTION EMAIL PHOTO
(XS2446)

BCP WHEELABRATOR 12 WHEEL STRUCTURAL MONORAIL SHOTBLAST     SOLD
MODEL: A47924, YEAR 1997
575 V, 3 PHASE, 60 HERTZ
WORK ENVELOPE: 6FT 6IN X 8FT H, PASS HEIGHT 9IN ABOVE FIN. FLOOR W/4FT 3IN DEEP PIT
5 TON CAPACITY MONORAIL INCLUDED
ALSO INCLUDED ENTIRE WALL WITH ALL CONTROLS
AIR WASH SINGLE LIP SEPARATORS, ONE ON EACH SIDE
W/WHEELABRATOR 6 000 CFM DUST COLLECTOR,
- PULSE TYPE, EXPLOSION PROOF & SILENCER
$15,000 WORTH OF SPARE PARTS
IN VERY GOOD RUNNING CONDITION
STILL UNDER POWER CAN BE SEEN RUNNING
PHOTO     PHOTO    
PHOTO
SEE SPEC SHEET[pdf]

More Information

2446 dust collector

(A1625) CANABLAST SAND BLAST
CABINET MODEL: M48.48.P,  S/N: MP23DA-1007,
YEAR 1989,  DOOR OPEN,   DUST COLLECTOR 
MODEL:DCM-230, S/N:MD-52L4.0006, 575V,  
SEPARATOR
MODEL:340, S/N:SC-4250.0244, 
WITH DUST COLLECTOR,
MODEL:DCM 100, S/N:MD50L1.1034, 120 VOLTS
More Information
(A1112)

CANABLAST  SOLD
Shot blast and Sand blast room system,  
8' x 9', with dust proof helmet, air supply,
recuperation system and dust collector 
MODEL: 340-P-RC-66-P
S/N: SC-4250-0676
YEAR: 2000
NAT'L BD. No. 246609
TANK DIM.: 18 INCH X 30 INCH
 
MORE DETAILS

More Information

(XC2649)

GOFF SHOT BLAST MACHINE     SOLD
MODEL: 1244 S/N: 07511-50-7102
YEAR 2007, 575 V, 3 PH,
CHAMBER OPENING SIZE : 15"W X 42"H -
METRIC 38 X 106 CM
CHAMBER SIZE: 20"(F) X 12"(B) X 43"H X14" DEEP -
METRIC 50(F) X 30(B) 109 X 35 CM
MACHINE WEIGHT (APPROX): 2,600 LB. -
METRIC 1,179 KG
MACHINE DIMENSIONS: 4'2" X 3'11" X 11'1" -
METRIC 1.9 X 1.2 X 3.4 M
FEATURES: RECYCLING SYSTEM FOR SHOT BLAST
MEDIA DUAL BLAST CHAMBER CONSTRUCTION
TWO DIRECT DRIVE BLAST WHEEL
PHOTO    PHOTO     PHOTO    PHOTO    PHOTO

More Information 2649
(A2514)

GOFF 3 CU FT TUMBLAST         SOLD
RUBBER BELT, MOD: 24X30 UBB, S/N: 83251-50-441
DATE: 12-83, 550 V
IN LIKE NEW CONDITION
PHOTO     PHOTO

More Information A2514
(AD3056)

HYDRO BLAST AUTOMATIC PARTS WASHER
MODEL: 45, S/N: 124993A, 220 V, 1PH, AMPS: 55
W/2 BASKETS 10" & 23", 2 HEATING ELEMENTS,
OIL REMOVABLE SYSTEM
IN LIKE NEW CONDITION
PHOTO    PHOTO    PHOTO

More Information 3056
(X5E2983)

METFIN 6 wheels continuous shot blast       SOLD
Manufacturer: METFIN (metal finish supply co. & equipment)
Type: mesh belt shot blast, Model: 6002
manganese mesh belt blast
S/N: 5002, Voltage: 460/3/60
Work area: 36"w x 18" clear height2971
External dimensions: 9'w x 25'h x 28'l Approx.
Dust collector: 6'w x 12'h x 12'l
Controls complete
Motors description:
Blast wheels (6) 20 hp, 3600 rpm, TEFC
Elevator 3 hp, 1800 rpm, TEFC
Longitudinal abrasive screw conveyor
2 hp, 1800 rpm, TEFC
Conveyor drive 1.5 hp
Abrasive blow-off: 10 hp
Dust collector included. Very good condition

More Information

2983

2983

2983

(X5E3293)

PANGBORN 72" SWING TABLE W/DUST COLLECTOR
MODEL: 6 LN, S/ N: 6LN-663
O.A. HEIGHT: 16'-6" HIGH, MAX REQ’D HGT: 20'-1"
LOAD HGT: 3', MAX WORK HGT: 36", TABLE DIA: 6'
CAPACITY: 5,000 LBS, TOTAL WEIGHT: 15,335 LBS
ROTO BLAST WHEELS: ONE, 20 HP MIN – 25 HP MAX
ABRASIVE FLOW: MIN: 32,000 LBS / HR
MAX: 40,000 LBS / HR
GENERAL: APPEARS TO BE COMPLETE

More Information 3293
(XWO3017)

PANGBORN ROTOBLAST MACHINE     SOLD
MODEL: 12 GN-M
12 CU. FT, MANGANESE LINERS AND BELT
WITH AUTOMATIC FLOOR LOADER
PHOTO

More Information 3017
(X6B2806) PANGBORN RUBBER BELT TUMBLAST     SOLD
30" W x 22" DEEP     PHOTO     PHOTO
More Information 2806
(BRD9451) PANGBORN MODEL 12GN STEEL BELT TUMBLAST CLEANING MACHINE  SOLD
WITH ALLEN BRADLEY MINI PLC -2/205 CONTROLLER S/N 12GN3-769, GRAFTON, OH
PHOTO     PHOTO     PHOTO
More Information 9451
(BRD00124) 15GN PANGBORN TUMBLAST    SOLD
S/N 15GN4712 WITH SKIP, SHARON, WI
PHOTO     PHOTO     PHOTO     PHOTO
More Information 00124
(X4P2690)

PANGBORN 26GNM
S/N 26GNM-693, W/ DUST COLLECTOR
MANGANESE FLIGHTS, PLC CONTROLS
DRAWING (pdf)   (jpg)
PHOTO     PHOTO     PHOTO     PHOTO
PHOTO     PHOTO     PHOTO     PHOTO

More Information 2690
(A2276)

PANGBORN STEEL BELT TUMBLAST      SOLD
MOD: GN-3
S/N: 6GN3-7310
PATTERN # 2533265
575 V
VIEW ELEVATOR

More Information
(AS2140) PANGBORN RUBBER BELT TUMBLAST        SOLD
MODEL: 6GN-5    PHOTO     PHOTO
S/N: 6GN-5-849
6 CUBIC FEET CAPACITY
460 V, 15 Hp BLAST WHEEL
HEIGHT: 13' 6''
FOOT PRINT: 7' X 7'
VIEW: INSIDE,     BLAST WHEEL LINER
More Information
(A2720) RAMBLAST 48'' SWINGTABLE SHOTBLAST
W/ DUST COLLECTOR    SOLD
EQUIPPED W/WHEELABRATOR DIRECT DRIVE 10 HP, BLAST WHEEL, 230/460 V,
WORK HEIGHT: 24''
PHOTO     PHOTO     PHOTO
More Information 2720
(BRD9038) 1995 SINTOBRATOR AUTOMATIC DRY FINISHING ROLL FLOW CENTRIFUGAL DISK CLEANING MACHINE
MODEL EVF-08RD, S/N EVF-08RD-012, 4.1 CU FT SOLDCAPACITY    PHOTO
More Information 9038
(BRD9039) 1993 SINTOBRATOR AUTOMATIC DRY FINISHING ROLL FLOW CENTRIFUGAL DISK CLEANING MACHINE
MODEL DZB-2EB, S/N DZB-2EB-100 SOLD
More Information 9039
(AB1119) Tumblast Spare Parts
60" spare flight, spare end link for 60" tumblast
More Information

(BRD10273) VIKING BARREL BLAST MACHINE WITH 10 HP MOTOR AND DUST COLLECTOR
30" X 40" OPENING, 30" BARREL
PHOTO     PHOTO      PHOTO
More Information 10273
(BRD10274) VIKING BARREL BLAST CABINET WITH DUST COLLECTOR
30" X 40" OPENING, 30" DIAMETER BARREL
 PHOTO     PHOTO
More Information 10274
(A2136) VIKING RUBBER BELT TUMBLAST        SOLD
MODEL: 600, YEAR 2004, CAP.: 27" X 36"
HEIGHT:12', 15 HP BLAST WHEEL
VOLTAGE 208-230-460, VIEW OPEN CONTROL
PNEUMATIC DOOR, DUST COLLECTOR
MODEL 9DC,
& IN VERY GOOD RUNNING CONDITION
More Information
(X5E3294)

WHEELABRATOR 12 CU FT TUMBLAST
MODEL:TBR-12,
RUBBER BELT
COMES WITH VIBRATORY CONVEYOR AND BUCKET LOADER
AS WELL AS DUST COLLECTOR
PHOTO     PHOTO      PHOTO

More Information 3294
(XC3232)

WHEELABRATOR FLOW THROUGH SHOT BLAST MACHINE
ROSLER TUMBLE SHOT-BLASTER.
NO: 4114
MODEL: A3-11022
SERIAL NUMBER: 1480
460/3PH/61.5HP/50.4KW
MANUF. YEAR: OCTOBER 1993
PASS THROUGH CHAIN CONVEYOR 24" x 20'
HYDRAULIC BIN DUMP 4' x 4'
FEED HOPPER 4' x 4'
INCLINED CLEATED POWER BELT INFEED CONVEYOR 24" WIDTH x 15' HIGH
INCLINED CLEATED POWER BELT OUTFEED CONVEYOR 24" WIDTH x 8' LENGTH
FEATURES:
• 3 WHEEL BLASTING
• BCP DUST COLLECTOR
• CONVEYOR
• PASS THROUGH CHAIN CONVEYOR WITH 30 HP HEADS
AVAILABILITY AND TERMS:
• MACHINE IS READY FOR INSPECTION AND/OR SHIPPING
• TECHNICAL DATA WITHOUT OBLIGATION – SUBJECT TO PRIOR SALE
PHOTO     PHOTO     PHOTO     PHOTO

More Information

3232

3232

3232

(XC3233)

WHEELABRATOR PASS THROUGH SHOT BLAST MACHINE
NO: 4115, MODEL: 2 W/A SPINTRAC THRU-FEED
SERIAL NUMBER: 138322
3 WHEELS-DIRECT DRIVE- 20HP, 460V/3PH
MANUF. YEAR: 1990’S, COMPLETE
BLAST AREA OPENING HEIGHT: 72''
BLAST AREA OPENING WIDTH: 48''
FEATURES:
• 4 POSITION AIR FLOAT ROTARY LOAD AND UNLOAD SYSTEM
• HANGERS INCLUDED
• WHEELABRATOR MODEL 1081 DUST COLLECTOR
• WITH MONORAIL OVERHEAD FEED THROUGH CONVEYOR SYSTEM
AVAILABILITY AND TERMS:
• MACHINE IS READY FOR INSPECTION AND/OR SHIPPING
• TECHNICAL DATA WITHOUT OBLIGATION – SUBJECT TO PRIOR SALE
PHOTO     PHOTO     PHOTO     PHOTO

More Information

3233

3233

3233

(X4P3241)

WHEELBRATOR 28 SUPER 2        SOLD
S/N A130216
MANGANESE STEEL
w/SKIP HOIST (loader)
PHOTO     PHOTO     PHOTO

More Information 3241
(XSJ3227)

WHEELABRATOR SPINNER HANGER
2 WHEELS x 22''
2 MOTORS, 20 HP, 575 V
INSIDE DIM.: 68'' WIDE x 72'' DEEP x 86'' HIGH
W/CONTROL PANEL
ALSO AVAILABLE 3,500 CFM DUST COLLECTOR(XSJ3227-1)
6 CARDRIDGES, ROTARY VALVE
PHOTO    PHOTO    PHOTO    PHOTO   PHOTO   PHOTO

More Information 3227
(X5T3284) 72 INCH TABLE BLAST
2 x 10 HP BLAST WHEEL
550 V
IN RUNNING CONDITION
PHOTO
More Information 3284
(XAS3305) 6' TABLE BLAST
W/ 2 WHEELABRATOR SHOTBLAST WHEELS
10 HP 
W/DUST COLLECTOR 
PHOTO
More Information 3305
(XS3270)

WHEELABRATOR (BCP) MESH MACHINE
6 WHEELS, YEAR 1997, 575 V
BELT 33" W, PART CLEARANCE: 36" W X 30" H 
READY TO WORK
ALREADY DISMANTLED READY TO LOAD ON TRUCK 
PHOTO    PHOTO    PHOTO    
PHOTO
PHOTO    PHOTO    PHOTO    
PHOTO

More Information 3270
(XS3295) WHEELABRATOR RLM WHEEL
REBUILT
More Information 3295
(XS3251)

WHEELABRATOR 6' SWING TABLE
S/N: A99635
550 V
1 x 30 HP WHEEL 
PHOTO     PHOTO     PHOTO     PHOTO

More Information 3251
(X4P2842) WHEELABRATOR SUPER 14 CU FT        SOLD
S/N: A116510
NEW: 1963
MANGANESE STEEL FLIGHTS, (BUT WORN TO ONE SIDE)
PHOTO     PHOTO     PHOTO
More Information 2842
(XSJ3228)

WHEELABRATOR TUMBLAST       SOLD
RUBBER BELT
20 X 27 ENTRY
ALSO AVAILABLE 1,200 CFM DUST COLLECTOR (XSJ3228-1)
BAGS
PHOTO     PHOTO

More Information 3228
(X5N3236)

WHEELABRATOR 27x36 TUMBLAST
BEING REBUILT AS FOLLOWS WITH:
-ALL NEW ROLLER BEARINGS AND RUBBER BELT 1/4" DRAIN HOLES.
-NEW BARREL HEADS
-NEW MILL DRIVE MOTOR.
-NEW ELEVATOR BEARING TOP AND BOTTOM.
-NEW ELEVATOR DRIVE MOTOR.
-REWORKED AND CLEANED UP ELECTRICAL PANEL USING SOME OF THE PARTS IN THE PANEL WITH REPLACING ANY WORN COMPONENTS AND INSTALL STARTER FOR DUST COLLECTOR TO COME ON WITH THE ELEVATOR.
-MACHINE HAS AN UP-DATED RLM WHEEL 15 HP WITH NEW TUNE-UP KIT INSTALLED.
-MACHINE ALSO HAS UP-DATED GUILLOTINE DOOR SYSTEM
ALSO AVAILABLE
-ONE 48 BAG DUST COLLECTOR
-NEW FAN MOTOR
-NEW BAGS INSTALLED

More Information

3236

3236

3236

(A3100) 14 CU FT WHEELABRATOR TUMBLAST
S/N: A121404 / UNI T702
W/LOADER
MANGANESE FLIGHTS & CHAIN, IN LIKE NEW CONDITION.
PHOTO     PHOTO     PHOTO
More Information 3100
(A2817)

WHEELABRATOR 31" X 48" TUMBLAST
W/MANGANESE FLIGHTS & ROTARY SCREEN     SOLD
& CENTRAL GREASE DISPENSER
S/N: A135701, 230/460V, 3 PH, 60 HZ, 30 HP
DRUM: 48" X 31", IN VERY GOOD RUNNING CONDITION
PHOTO     PHOTO     PHOTO     PHOTO
PHOTO     PHOTO     PHOTO

More Information 2817
(X5N2736)

WHEELABRATOR SUPER 22CU FT     SOLD
PARTS RECENTLY REPLACED:
-HEAD PULLEY AND BOOT PULLEY
-COMPLETE MILL- LINKS-BARRELHEADS
-CABINET LINERS AND WHEEL HOUSING LINERS
-TUNE-UP KIT- ALL MOTORS
-ELEVATOR GEARBOX
BRAND NEW PARTS:
-ALL ELECTRICAL CONTROLS
-ELEVATOR AND BUCKETS
-MILL DRIVE MOTOR
- DRIVE BELT
ALSO INCLUDED:
96 BAG WHEELABRATOR DUST COLLECTOR
SKIP LOADER     PHOTO     PHOTO     PHOTO

More Information

2736

2736

(X1S2650) WHEELABRATOR 6 CU FT SHOTBLAST    SOLD
MODEL: N/A, YEAR: 60'
S/N: A109858 (39187)
CAPACITY: 6 CU.FT. APPROX.
DOOR: 43" W APPROX. (INSIDE DIM.: 34" W X 28" D)
VOLTAGE: 600/480/440V/3PH (15 & 10 HP - 30 AMPS.)
INCLUDES: 30 MIN. TIMER, TRANSFO.
DIMENSIONS: 79" W X 72" D X 102" H
CONDITION: GOOD
PHOTO     PHOTO     PHOTO     PHOTO     PHOTO
More Information 2650
(XWO2578)

WHEELABRATOR 12' DIAMETER TABLE SHOT BLAST MACHINE    SOLD
MODEL THREE WHEELABRATOR 3700 SPACE SAVER TABLE, S/ N: A-132253, NEW 1979
(3) 25RLM-195 WHEELS, 40" CFS SEPARATOR
DUST COLLECTOR
SPARE PARTS (WHEELS, LINERS, TABLE BEARING, ETC.)
LAYOUT PRINT AVAILABLE    PHOTO     PHOTO

More Information 2578
(AB2516) WHEELABRATOR 14 CU. FT TUMBLAST    SOLD
S/N: A123155, 460 V
IN VERY GOOD RUNNING CONDITION
PHOTO     PHOTO     PHOTO
More Information A2516
(AB2517) HYDRAULIC TUMBLAST LOADER      SOLD
FOR 6, 7, 9 OR 14 CU. FT. TUMBLAST
PHOTO
More Information A2517
(A2512)

HYDRAULIC TUMBLAST LOADER
FOR 14 to 22 CU. FT. TUMBLAST

More Information A2512
(BRD10042)

1994 WHEELABRATOR TBR-12, 12 cu ft RUBBER BELT    SOLD
Single wheel. Comes with vibratory and bucket loader as well as Dust collector. Serial #:  A-140019
PHOTO      PHOTO     PHOTO

More Information 10042
(XS2680) WHEELABRATOR SKEW ROLL BAR BLASTER     SOLD
CAPACITY: 1" to 8", SERIAL#: MA-128034
VOLTAGE: 600 V
1 SHOT WHEELS AND 25 HP OF THE WHEELS
TYPE OF WHEEL:NEW RLM (SOUNDABATOR VALVE)
SEPARATOR IS 24'' LG ROTARY SCREEN SYSTEM
(INDEPENDANT DRIVE)
VERY GOOD CONDITION OF THE ROLLERS
VERY GOOD CABINET CONDITION
15' ELEVATOR
DUST COLLECTOR(CARTRIDGE SIZE 33, MOD 36 WCC)
(20-4775)(2003)(3600 ACFM)
FOOT PRINT: 23' LONG WITH CONV., 10' CABINET
(6' WIDE ESTIMATE.)
PITLESS     PHOTO     PHOTO     PHOTO
PHOTO     PHOTO     PHOTO     PHOTO
More Information 2680
(A2587)

WHEELABRATOR 14 CU. FT SHOTBLAST     SOLD
S/N: A118573, 30 HP, 600 V
SLIDE BLADE, W/BUCKET LOADER, MANUAL AVAILABLE
STILL UNDER POWER CAN BE SEEN RUNNING
PHOTO     PHOTO     PHOTO     PHOTO     PHOTO
PHOTO     PHOTO     PHOTO     PHOTO     PHOTO

More Information 2587
(X4S2430)

WHEELABRATOR 4 WHEELS SHOTBLAST PLATE MACHINE    SOLD 
MODEL: 10-0295A   PHOTO     PHOTO     PHOTO
S/N: LERC4, 600 V, W/CONTROL
MOTORS: 4 x 20 HP, 9 CARTRIDGES
7.5 HP DUST COLLECTOR INCLUDED, 3,300 CFM
35' TO 40' ROLLER INLET & OUTLET
PITLESS, OPENING DIM.: 72'' W X 40'' H
NEW PLATES & NEW WHEELS ADDED BEFORE SHUT DOWN, IN VERY GOOD RUNNING CONDITION

More Information
(BRD9914)
(BRD9915)
WHEELABRATOR  SUPER III 34 CU FT TUMBLAST CLEANING MACHINES     SOLD
(2 AVAILABLE) S/N A-141345 & S/N A-140061
(New 1996 and 1995), each equipped with Floor Loader, 2- 50 hp direct drive wheels, manganese lining, Discharge Oscillating Conveyor, with Drive
PHOTO     PHOTO
More Information
(BRD9913) WHEELABRATOR  SUPER III 28 CU FT TUMBLAST CLEANING MACHINE     SOLD
S/N A-140386 (New 1995), Equipped with Floor Loader, 2- 40 hp direct drive wheels, manganese lining, Discharge Oscillating Conveyor, with Drive
More Information
(AS0431)

WHEELABRATOR PASS THROUGH 8 WHEELS
VERTICAL STRUCTUAL,
       PHOTO
S/N A127626, NEEDS A PIT    SOLD
DOOR OPENING 5 FT WIDE X 9 FT HIGH
VIEW: SIDE,     ELEVATOR,     CONVEYOR
CONTROL      CLOSE UP-1       CLOSE UP-4
GENERAL ARANGEMENT DRAWING AVAILABLE

More Information

(A1903) WHEELABRATOR 14 CU. FT TUMBLAST
Completely Rebuilt
       SOLD
S/N:A124414     PHOTO
480 V, 30 HP, MANGANESE FLIGHTS
VIEW ELEVATOR,     CONTROL,     SIDE
More Information
(XAS0678)

WHEELABRATOR TUMBLAST 34 CU FT 
S/N A118628, 460V
W/ ROTARY SCREEN & ELEVATOR
MISSING PART OF BLAST WHEEL
PHOTO
    SOLD

More Information

(BRD8955) WHEELABRATOR 6' DIAMETER SINGLE DOOR SWING TABLE BLAST CLEANING MACHINE
S/N A120455     SOLD
IN VERY GOOD CONDITION     PHOTO      PHOTO
More Information 8955
(XWB1393) WHEELABRATOR  SHOTBLAST S/N: A-127823,
YEAR 1979, 72 IN TABLEBLAST, COMPLETELY REBUILT
         
More Information

(BRD9052)

WHEELABRATOR SPINNER HANGER BLAST CLEANING MACHINE MODEL MSH4-600 S/N 300532 WITH TWO 10 HP SHOT WHEELS AND SHOT SYSTEM, 4 COMPARTMENT, 24" DIAMETER X 39" OPENING, BUILT IN DUST COLLECTOR.      PHOTO      PHOTO
Manufacturer: WHEELABRATOR
Serial Number: 300532
Year: 1997 Location: KINGSVILLE, MO SOLD

More Information
(A1093) WHEELABRATOR BUCKET LOADER     SOLD
FOR A 27" X 36" TUMBLAST 460Volts
More Information

(A2346) WHEELABRATOR 14 CU FT TUMBLAST     SOLD
MODEL: SUPER II S/N: A130539
INCLUDES:
-LOADER BUCKET, -LOADER FRAME
-ELEVATOR, -SEPARATOR ASSEMBLY
PHOTO   PHOTO   PHOTO   PHOTO   PHOTO
More Information
(AB1132)

WHEELABRATOR RUBBER BELT TUMBLAST     SOLD
s/n: A11919, 440V, 3 phases, 60HZ, 
with dust collector
Height: 13 ft 6 in    
27 IN X 36 IN      INSIDE
VIEW BLAST WHEEL LINER
RIGHT SIDE,
    LEFT SIDE

More Information

 

 

(X5R3022)

ZERO BLASTER MODEL: 600 DRY FILTER
S/N: 35035
BASKET SIZE IS: 43'' LONG X 23'' DIAM.
TRANSFO: 15 KVA, 60 HZ W/10 HP MOTOR, 120/208V
APPROX.TOTAL DIM: 75''H X 72'' LONG X 65'' WIDE
PHOTO   PHOTO   PHOTO
PHOTO   PHOTO   PHOTO

More Information 3022
(BRD00122) ZERO 8' DIAMETER TABLE BLAST,       SOLD
2-7 1/2 HP DIRECT DRIVE SHOT WHEELS,
SMALL SEPARATOR
STAINLESS STEEL LINERS AND TABLE
PHOTO   PHOTO   PHOTO
PHOTO   PHOTO   PHOTO
More Information 00122

Home

Updated December 27, 2016
This site is Copyrighted 1997-2017 by BRADFORD EQUIPMENT INC. All Rights Reserved.
No part of this site may be copied or reproduced without the expressed written consent of BRADFORD EQUIPMENT INC.