All posts by admin

Wheelabrator Skew Roll

Wheelabrator 1 Wheel Skew Roll Machine

 

This machine is reconditioned as required and includes an IBT Standard One (1) Year Warranty

Machine Description:

 Heavy Manganese blast cabinet, continuous weld.

 Fully Cast Blast Chamber with cast chromemoly liners on walls and roof.

 Cast Horse collar around the Blast Wheel opening.

 Heavy duty abrasive box above the lower auger, in-line with the blast to protect the lower auger.

 Mild steel entrance and exit vestibule and vestibule Gum Rubber seals.

 Heavy Duty, 12” long Cast Skew Rolls on 10” centers throughout with a common line shaft, sheaves and belts for each skew roll assembly.

 Variable speed drive for the skew roll conveyor.

 One (1) longitudinal screw conveyor.

 One (1) HD, 7 x 21 elevator assembly with cast steel buckets and multi-ply elevator belt.

 One 18” CFS gravity separator assembly with abrasive hopper.

 One (1), 26” Diameter, 40 hp. 1800 RPM, direct driven, Wheelabrator EZFIT Blast Wheel with (8) 3 ½” blades, Cast Manganese Wheel Housing with cast end and top liners.

 One (1) lot of pneumatics.

 One (1) NEMA 12 control panel with IEC rated components and

 460 V/3 ph/60Hz electrics, 120V control voltage.

 Control Panel with PLC Controls.

Notes:

  • If a different power voltage is needed, a power transformer may be required.
  • Freight, Installation, Commissioning & Start-up: Can be provided at extra cost.

BRONCO 8 WHEEL BELT BLAST

BRONCO 8 WHEEL BELT BLAST
 
36″ wide manganese wire mesh belt ,
with 24″ work clearance
(8)  20 HP direct drive blast wheels,
manganese housings
(8)  A/B VFD’s 1 per wheel, each wheel is
variable speed
Butterfly style abrasive valves
Manganese blast cabinet,
with additional cast liners
Entrance & Exit vestibule,
3 sets of rubber hanging seals
elevator recovery, with 60″ rotary screen
and air-wash separator
Torit DFT 2-12  cartridge DC, with 15 HP blower
Free standing electrical panel,
with VFD’s installed
SLC-500 Controls 
OAL   32′ long x 8′ wide x 19′ 10″ tall,
not including DC and panel
 

Goff Spinner Hanger

Goff 36/72  2 Chamber  spinner hanger
(2)  10 HP blast wheels, with abrasive valves
(2)   blast chambers,  effective blast area 32″ dia. x 52″ L
(1)   BCP cartridge DC Ready to load and ship

Goff Spinner Hanger Goff Spinner Hanger Goff Spinner Hanger Goff Spinner Hanger

 

 

 

 

 

 

Goff Spinner Hanger

Pangborn 12 LK

S/N 12LK-661
Rebuilt in 2005
W/12′ DIAMETER TABLE
15′ W X 19’6″ FLOOR TO TOP OF ELEVATOR,
14’6″ L SCREW CONVEYOR,
(3) 30 HP WHEELS,
2 HP TABLE DRIVE W/ELEVATOR,
TYPE BNR 9 SEPERATOR
(NO CONTROL PANEL)
Was removed about 2 years ago.