Bradford Equipment Home PageBradford Equipment Company InformationBradford Equipment ServicesBradford Equipment LiquidationsBradford Equipment SpecialsBradford Equipment New ListingsBradford Equipment SpecificationsSearch UFDY site

Bradford Equipment Inc.
UFDY.com

Used Foundry Equipment On-line!

The exclusive distributor in North and South America for:

MODTECH WAX INJECTORS (BRD8233) Click to enlarge


DEPENDABLE , FLEXIBLE & AFFORDABLE WAX INJECTION TECHNOLOGY AVAILABLE NOW
MODEL C35D:
35 TONNE CLAMPING FORCE "C FRAME" ,
DUAL INJECTION WAX INJECTION MACHINE

More Information

MACHINE DESCRIPTION:
35 Tonne, Vertical Downward Clamping, C Frame, Semi Automatic, Hydrulic Wax Injection Machine.
DUAL NOZZLES:
The machine is fitted with the following injection nozzle configuration: -

  • Nozzle 1:    Horizontal Injection with Horizontal & Vertical Axis Movement,
    In - Out 200mm Up - Down 200mm (Hydraulic Controlled Movement)
  • Nozzle 2:    Bottom Injection. Fixed Nozzle, Injection Upwards.
  • Nozzle 1 & 2:     Panel Changeover Switch To Facilitate Dual Injection.

NOZZLE TIP:
10mm Spherical Radius for Both Horizontal & Vertical Injection Nozzles.
MAXIMUM SINGLE SHOT SIZE:
4.5 Litres (Can be increased to 8.0 Litres as an option at extra cost)

INJECTION PRESSURE:
5 - 50 Bar Variable Through Keypad.
PLATEN DETAIL:
600mm Wide x 500mm Deep x 500mm Daylight.
CLAMP PRESSURE:
Adjustable via Keypad.
WORK TABLE:
1 Metre from Ground Level, Working Area Projection 350mm Deep in .U. Shape.
DWELL TIME:
Solid State Digital Display 0.999 Seconds.
WAX MELTING TANK:
60 Litre Capacity with Motorised Stainless Steel Agitator, Slip Clutch Coupling, Annular Tube Type Reservoir with Tri Zone Heater. Independent Temperature Control For Top & Bottom of Tank, Heated Wax Drain Valve.

TEMPERATURE CONTROL:
Independent Solid State Digital Display of Block Temperatures, Tank Top & Bottom, Nozzle 1 & 2
and Hose for Nozzle 1 & 2, Dual Timer type Controller for Noz zles 1 & 2 Heaters,
Simmerstat Type for Wax Drain Valve Heater
SAFETY:
CE Marked, with Dual Push Button for Cycle Start, Overheat Alarm for Injection Block & Wax Tank Nozzle,
Fitted safety cut out .Tapeswith. on base of guard.
High Visibilty Pneumatically Operated Guard Covering 3 Sides Of Platens, Fitted Emergency Stop Button.
INJECTION FLOW RATE:
Variable Via Keypad.
AUTOMATIC SEQUENCE:
Pus To Start - Guard Down - Clamp Down - Wax Suction - Nozzle Forward - Injection - Nozzle Return -
Clamp Up - Guard Up - Surplus Wax To Tank.
ELECTRIC LOAD:
10 kva, 415 Volts 3 Phase 50 Hz with Neutral & Ground.
HYDRAULICS:
5 hp Variable Displacement Pump, 20 Litres per Minute, 100 Litre Oil Reservoir.
PLATEN DETAIL:
M10 Die Mounting Holes in Both Top & Bottom Platens, cooling channels Top & Bottom are Standard..
WAX SLAB MELTER:
20 Litres per Hour Throughput Rate, Mounted on Wax Tank with level Sensor & Control Switch.
OPTIONAL EXTRAS:
"Paste" Wax Conditioning Unit, 8.0 Litre Shot Size.

For Sales & Service please contact :

Bradford Equipment Company Inc.

Ft. Myers, FL 33908

Phone
239-478-2474
239-410-2095
239-940-2730

Email john@ufdy.com

Return to Wax-Injection        Home

Updated September 23, 2016
This site is Copyrighted © 1997-2017 by BRADFORD EQUIPMENT INC. All Rights Reserved.
No part of this site may be copied or reproduced without the expressed written consent of BRADFORD EQUIPMENT INC.