BT Range
The BT range of machines are rollover draw swing head style design that utilizes both a low frequency, long stroke anvil jolt for pre-compaction of the mold as well as a simultaneous jolt squeeze for the final compaction. This fully automatic machine is entirely pneumatically powered. |  |
Overall Dimensions BT Range
| BT 5 | BT 7 | |
| A | 72 in / 1,829 mm | 98-5/8 in / 2,505 mm |
| B | 14-1/4 in / 362 mm | 20-1/2 in / 521 mm |
| C | 18 in / 457 mm | 23 in / 584 mm |
| DMax | 33-3/4 in / 857 mm | 38 in / 965 mm |
| DMin | 24-1/4 in / 616 mm | 30 in / 762 mm |
| E | 43-5/8 in / 1,108 mm | 57-3/8 in / 1,457 mm |
| F | 99 in / 2,514 mm | 121-7/8 in / 3,096 mm |
| G | 55-3/4 in / 1,416 mm | 67-5/8 in / 1,718 mm |
| HRAD | 45-1/2 in / 1,156 mm | 54-1/2 in / 1,384 mm |
Technical Data
| BT 5 | BT 7 | |
| Joint Capacity* | 1,500 lb / 680 kg | 4,000 lb / 1,814 kg |
| Squeeze Force* | 15,900 lb / 7,214 kg | 40,000 lb / 18,144 kg |
| Squeeze Stroke | 12-13/16 in / 325 mm | 16 in / 406 mm |
| Pattern Draw** | 12-13/16 in / 325 mm | 16 in / 406 mm |
| Table Size** | 42 x 28 in / 1,067 x 711 mm | 53 x 38 in / 1,350 x 965 mm |
| Net Weight | 10,192 lb / 4,636 kg | 26,640 lb / 11,176 kg |
* Jolt capacity and squeeze forces are calculated at 90 psi (6.2 bar)
* * Alternative table sizes, daylight openings and draw strokes available upon request.
BMM Weston reserves the right to alter specifications contained in the above tables without prior notice.
